Ideas on this Dewalt Compressed Air Piping System?

A reader (thanks, Brandon!) wrote in about this new Dewalt compressed air piping system (DXCM024-0400), which is designed for putting in surface-mounted air traces in a workshop surroundings.

Different manufacturers supply kits much like this one, resembling Husky’s air compressor extension equipment.

This Dewalt air plumbing equipment has a bigger tubing dimension – 3/4″ interior diameter, 1″ outer diameter – much like different manufacturers’ greater capability kits.

It comes with 100 ft of HDPE/aluminum tubing that may stand up to as much as 200 PSI of strain at 73°F and 160 PSI at 140° F. The tubing might be lower to dimension with the included device, and can maintain its form when bent. It may be bent round corners with a 6″ minimal radius.

The equipment comes with an assortment of manifolds, tee fittings, elbow fittings, straight fittings, drain valves, and mounting brackets. It additionally comes with a tubing cutter and a deburring device.

The entire fittings are compression-style, for a straightforward and tight leak-free match.

Right here’s a full checklist of what you get:

• 100′ 3/4″ tubing
• (3) aluminum outlet manifolds
• (1) 3/4″ x 3/4″ NPT straight becoming
• (3) 3/4″ x 1/2″ NPT straight becoming
• (3) 3/8″ NPT drain valves
• (2) 3/4″ x 3/4″ x 3/4″ tee fittings
• (2) 3/4″ x 3/4″ elbow fittings
• (20) Metal mounting brackets
• Tube cutter
• Deburring device

Set up requires further instruments:

• 2 adjustable wrenches or pliers
• Everlasting marker
• PTFE thread seal tape
• Pipe sealant
• (40) Fasteners for floor mounting (Should slot in 1/4″ Gap)

I might additionally add a stud finder to the checklist, as a minimum.

Dewalt’s person guide additionally advises that customers ought to NOT join this equipment on to an air compressor., and {that a} 3/4″ NPT hydraulic hose (not included) must be used to assist decrease vibration to the workshop’s air plumbing.

Maybe Rapidair’s 3/4″ x 3′ air compressor jumper hose, which is rated at 200 PSI, may serve this goal. (It’s out there through Amazon and you will discover related merchandise at different sellers as effectively.)

A top quality 3/4″ filter regulator can be advisable, with the guide emphasizing one have to be used.

The wall clips (included) needs to be spaced 5′ aside.

The person guide additionally illustrates a typical structure that makes use of the complete equipment.

Utilizing the included equipment, there’s an air provide line – which needs to be decoupled from the air compressor utilizing a hydraulic hose to attenuate vibrations – and in addition 3 provide department traces, every with a drain and threaded port.

That is in all probability the place the person guide’s advice for 1/2″ NPT male fast join fittings are available in.

Value: $219 and up

Dialogue

In my view, there are 3 principal advantages to air line plumbing kits like this: simpler planning, simpler set up, and simpler expandability.

Though this new Dewalt equipment doesn’t look to do something new or in a different way in comparison with different air line plumbing kits already available on the market, it at the very least appears aggressive. Nonetheless, what if customers need one other provide line department? What in the event that they want further compression fittings?

Customers ought to be capable to combine and match with different manufacturers’ equipment and add-on elements. Perhaps?

It’s my understanding that Dewalt’s air hoses, hose reels, and different related air compressor equipment are licensed merchandise, though this might be fallacious or have modified. I can not reliably pinpoint who their provider is perhaps for this equipment, however possibly you’ll have higher luck – tell us within the feedback!

The reader that introduced up this equipment requested for my tackle it, so right here it’s.

Residence Depot’s $270 value is a bit greater than I’d need to pay, seeing as how competing techniques are priced at $219. I’ll spend extra for most well-liked colours, however $50 extra for yellow tubing and black-finish {hardware}?

Buying round, CPO has this equipment for $219, matching the value of the Maxline equipment on Amazon.

As talked about, you’ll want extra provides than simply this equipment, resembling a properly-rated jumper hose in your compressor connection, and a filtered regulator, plus some fundamental hand instruments and no matter you may want for surface-mounting the tubing and department traces. That is true for any model’s piping equipment.

I’ve not used such a setup myself but, however I might. Kits like this are extra trouble-free than having to analysis, supply, and set up properly-rated inflexible tubing individually.

The Dewalt’s product itemizing and advertising data doesn’t full educate potential clients as a lot as what I’ve seen from different manufacturers’ merchandise, which is okay, however I personally favor a bit extra handholding with merchandise like this.

The person guide fills in a lot of the gaps, however leaves a number of questions, resembling the place to supply further equipment ought to system enlargement be needed.

Let’s say you mangle one of many fittings, are you able to supply a substitute? Would the Maxline M8005 straight becoming with 3/4″ tubing compression socket and 1/2″ NPT Male thread do the trick?

What when you purchase the Dewalt equipment and wish an extra size of hose? Can you purchase simply the hose, or do it’s essential purchase a second equipment?

I’m conversant in air piping kits, however not sufficient to know whether or not completely different manufacturers’ tubing and fittings work effectively with one another. I’ve seen “requirements” differ in sufficient product classes the place compatibility just isn’t assured.

The Dewalt might be an important product. Perhaps it’s on-par with competing merchandise, or maybe higher in a roundabout way, however I fail to discern any apparent benefits.